Signal Conditioners From Kistler Instrument Corporation
Kistler Signal Conditioners, Signal Conditioning Products & Accessories Powering, conditioning and computer interface solutions are available from a suite of electronic equipment tailored to provide measurement flexibility with utmost quality and integrity. Couplers from inexpensive single channel to large, modular, multichannel platforms can be selected. Charge amplifiers with dual mode (low and high impedance) capability offer adaptability to a variety of sensor configurations.
|
|
Kistler Signal Conditioning
|
Back To Top |
|
Kistler Modules for Signal Conditioning System, Type 2853A..., 2207A..., 5063A..., 5227A..., 5613A...
The SCP modules are modules for the SCP base unit Type 2853A... and signal conditioner Type 2859A. |
 |
|
Kistler PiezoSmart™ Signal Conditioning Platform for Acceleration, Type 2853A(X)Y45
The 2853A(X)Y45 Signal Conditioning Platform (SCP) for Acceleration is a modular system that supports up to 8 plug-in cards containing four channels each. |
|
|
Kistler PiezoSmart™ TEDS Accelerometer Signal Conditioning Module, Type 5150A
Four channel plug in module for use with a 2853A... Y45 Signal Conditioning Platform (SCP). |
|
|
Kistler Amplifiers
|
Back To Top |
|
Kistler Piezoresistive Amplifier, Type 4603B...
The microprocessor-controlled piezoresistive amplifier Type 4603B... is mainly used with pressure sensors of the Types 4043A, 4045A, 4073A and 4075A for measuring in the range 1... 500 bar. |
|
|
Kistler Piezoresistive Amplifier With Digital Adjustment, Type 4611
Compact amplifier with integrated digital switch, suitable for use with piezoresistive transducers. |
|
|
Kistler Amplifier with Pressure and Temperature Output, Type 4618A0, 4618A2, 4618A4
Versatile amplifier for piezoresistive pressure sensors which require constant current excitation. |
|
|
Kistler Digital Amplifier for the Extrusion Process, Type 4620A...
The digital amplifier Type 4620A... has been specially designed for use with piezoresistive sensors where a very accurate measurement is required. |
|
|
Kistler Universal Piezoresistive Amplifier on Euro-Card, Type 4657A
Amplifier on Euro-Card for piezoresistive sensors with current or voltage excitation and for 2-wire transmitters 4-20 mA. |
|
|
Kistler Dual Monitor for Pressure and Temperature in Extrusion, Type 4801B
The Dual Monitor is used with Kistler silicon pressure sensors in extrusion for measuring the melt pressure and the nozzle temperature. |
|
|
Kistler Dual Mode Charge Amplifier with Piezotron Oprating Mode, Type 5010
The 5010B is versatile, line-powered, dual mode amplifier for use with high impedance (charge mode) or low impedance (voltage mode) sensors. |
|
|
Kistler Charge Amplifier, Type 5011B
The mains-operated, microprocessor controlled one-channel charge amplifier Type 5011B converts the electrical charge yielded by piezoelectric sensors into a proportional voltage signal. |
|
|
Kistler Charge Amplifier, Type 5012
10V signals and ±20 mV for connection to the input of controllers that require a 20 mV signal level. |
|
|
Kistler Single Range Charge Amplifer, Type 5014A
A simple to use single range, line powered charge amplifier that converts the charge signal from a high impedance piezoelectric force, pressure or acceleration type sensor into a high level output voltage. |
|
|
Kistler Charge Meter, Type 5015A...
This instrument can be used wherever mechanical quantities are measured with piezoelectric sensors. |
|
|
Kistler Multichannel Charge Amplifier, Type 5017B
This type is especially used for combined force and moment measurements together with piezoelectric multicomponent dynamometers. |
|
|
Kistler Multichannel Charge Amplifier, Type 5019B
Microprocessor-controlled 3 channel or 4 channel charge amplifier system for converting the charges yield by piezoelectric sensors into proportional voltages. |
|
|
Kistler In-Line Amp Charge Amplifier, Type 5027A
Industrial amplifier which converts the charge produced by quartz sensors into a proportional voltage. |
|
|
Kistler 1-Channel Charge Amplifier, Type 5034A10, 5036A1
Industrial amplifier for converting charge signals from quartz sensors into proportional voltage signals. |
|
|
Kistler Multichannel Charge Amplifier, Type 5034A2..., 5034A3..., 5036A
Industrial amplifier for converting charge signals from quartz sensors into proportional voltage signals. |
|
|
Kistler Charge Amplifier, Type 5037B1..., 5037B3
Charge amplifier for industrial use. This instrument is housed in a rugged, sealed plastic case and is supplied with either one or three channels, already adjusted or adjustable in situ. |
|
|
Kistler Industrial Charge Amplifier, Type 5038A
Industrial charge amplifier for converting electric charge generated by piezoelectric sensors into a proportional voltage. |
 |
|
Kistler Industrial Charge Amplifier, Type 5038A2Y43
Industrial charge amplifier with 2 channels for converting electric charge generated by piezoelectric sensors into a proportional voltage. |
|
|
Kistler Miniature Charge Amplifier, Type 5039A
The miniature charge amplifier Type 5039A converts the electrical charge signals yielded by piezoelectric sensors into proportional voltages. |
|
|
Kistler Miniature Charge Amplifier without Housing, Type 5040A
The miniature charge amplifier Type 5040A converts the electrical charge signals yielded by piezoelectric sensors into proportional voltages. |
|
|
Kistler Charge Amplifier with Digital Adjustment, Type 5041E
Charge amplifier for converting an electrical charge into voltage. |
|
|
Kistler Hybrid Charge Amplifier, Type 5042Q, 5755Q
The described hybrid charge amplifier and the pertaining hybrid power supply are mainly used in industrial measuring systems. |
|
|
Kistler Types 5044A, 4643, 5738A, 5740A, 5669 Multichannel Amplifier System
This modular measuring system can be assembled as required from the 2-channel modules - Type 5044A Charge Amplifier, Type 4643 Piezoresistive Amplifier and a case. The modules can also be used directly in the AVL-IndiSet. |
|
|
Kistler Charge Amplifier, Type 5050A
A signal processing device that converts the charge signal from a high impedance piezoelectric sensor into a voltage signal at a low impedance level. |
|
|
Kistler Charge Amplifier, Type 5058A
The Charge Amplifier on Euro-Card Type 5058A converts the charge yielded by piezoelectric sensors into a proportional voltage and can capture peak values. |
|
|
Kistler Charge Amplifier, Type 5151A
The 32 channel charge amplifier was developed for Modulas, for the signal conditioning of WIM sensors. |
|
|
Kistler Charge Amplifier, Type 5153A
Industrial charge amplifier with 18 or 9 channels for connecting up to respectively 36 or 18 Lineas sensors. |
|
|
Kistler Multi-Channel Amplifier, Type 5155A
The purpose of the multi-channel charge amplifier Type 5155A with 1, 2 or 4 channels is to convert the charge signal from piezoelectric sensors or the signal from thermocouples into a proportional voltage signal. This amplifier has been developed for industrial applications, in particular for injection molding machines. |
|
|
Kistler Manual Charge Amplifier, Type 5995A
Battery operated charge amplifier with display for measurements with piezoelectric sensors. |
|
|
Kistler 8-Channel Charge Amplifier, Type 9865E
The 8-channel charge amplifier Type 9865E is, together with the Kistler force plates, mainly used in biomechanics. |
|
 |