Kistler's Perfect Cable Connection

All Kistler signal conditioning cables are designed to provide optimum signal transmission. Developed to perform in the most unusual applications from cryogenic to ultra high temperature, adverse to laboratory environments, and available for low or high impedance transduction. There is a cable specially designed for any and every need. A wide array of options, including line length and plug design, are available for each cable model.

Kistler's premium signal conditioning cables/connectors are rugged, dependable and assure precision sensor measurements. Kistler connectors are high quality stainless steel. Noise and intermittent operation are eliminated because there is no plating to wear off. Stainless steel also reduces the weight by 50% compared to conventional connectors therefore reducing mass loading in accelerometers. O-rings at each end seal out moisture and contaminants. A built-in strain relief replaces shrink tubing provided a reduced loop radius.

Unlike conventional signal conditioning cables, only low-noise extruded Teflon cable is used for a true water tight cable seal and it won't fray during normal use. These cables can be used with both low and high impedance sensors and have a temperature range of -320 to 465°F.

Acceleration Sensors | Force Sensors | Pressure Sensors | Torque Sensors
Signal Conditioners | Cables | Calibration Equipment | Electronics | Mounting
Measuring Instruments | Monitoring & Control Units | Preloading Elements